Diamond Edge Planes   Iron Bench Planes Smooth Planes Features: Black enameled cast iron frame, face of bottom and sides ground true and smooth, composition rubber handle, ebonized wood knob, full polished cap and cutter, highest grade tool steel thin bit cutters, oil tempered, ground and hand sharpened, screw and lever adjustment and brass adjusting nut. DE 3 Smooth Bottom DE3 Length 8 3/4 inches cutter width 1 3/4 inch   DE4 Length 9 inches cutter width 2 inch   DE 4 1/2 Length 10 inches cutter width 2 3/8 inch     Corrugated Bottoms DEC3 Length 8 3/4 inches cutter width 1 3/4 inch   DEC4 Length 9 inches cutter width 2 inch   DEC 4 1/2 Length 10 inches cutter width 2 3/8 inch Jack Planes DE5 Smooth Bottom DE5 Jack Length 14 inches cutter width 2 inch   DE 5 1/2 Jack Length 15 inches cutter width 2 1/4 inch   DE6 Fore Length 18 inches cutter width 2 3/8 inch   DE7 Jointer Length 22 inches cutter width 2 3/8 inch   DE8 Jointer Length 24 inches cutter width 2 5/8 inch Corrugated Bottom DEC5 Jack Length 14 inches cutter width 2 inch   DEC 5 1/2 Jack Length 15 inches cutter width 2 1/4 inch   DEC6 Fore Length 18 inches cutter width 2 3/8 inch   DEC7 Jointer Length 22 inches cutter width 2 3/8 inch   DEC8 Jointer Length 24 inches cutter width 2 5/8 inch Block Planes Features: Refined cast iron frame and cap, highest grade tool steel, thin bit cutter, oil tempered, groung and hand sharpened.  Regular Adjustable Japanned top, cap and trim face and sides, brass adjusting nuts, adjustable throat which can be quickly opened or closed for fine or coarse work by a movement of the cam lever at nose. DE 9 1/2 DE 9 1/2 Length 6 inches cutter width 1 5/8 inch   DE15 Length 7 inches cutter width 1 5/8 inch Knuckle Joint Adjustable Japanned top, polished face and sides, nickel plated cap, brass adjusting nuts, adjustable throat which can be quickly opened or closed for fine or coarse work by movement of the cam lever at nose. DEX18 DEX 18 Length 6 1/4 inches cutter width 1 5/8 inch Low Angle Adjustable Japanned top and lever cap, polished face and sides, dull nickeled adjusting nut and lever, brass finger rest knob, nickel plated eccentric plate, adjustable throat which can be quickly opened or closed for fine or coarse work by a movement fo the cam lever at nose. DEX 60 1/2 DEX 60 1/2 Length 6 inches cutter width 1 3/8 inch   DEX 65 1/2 Length 7 inches cutter width 1 5/8 inch Regular Wood Knob Adjustable Japanned top and caps, polished fasce and sides, beechwood knobs.  DEX 220 DEX 220 Length 6 7/8 inches cutter width 1 5/8 inch Double End Non-Adjustable Japanned top and cap, polished face and sides, beechwood knob with two slots and reversible cutter seat. DEX 130 DEX 130 Length 7 3/4 inches cutter width 1 5/8 inch. Adjustable Non-Adjustable Japanned top sides and cap ground face. DE 103 DE 103 Adjustable Length 5 3/8 inches cutter width 1 3/8 inch   DE 102 Non-Adjustable Length 5 3/8 inches cutter width 1 3/8 inch Non-Adjustable Refined cast iron frame and cap, highest grade tool steel thin bit cutter, oil tempered ground and hand sharpened. Japanned top and cap, polished face and sides, beechwood knob. DE 110 DE 110 Length 7 inches cutter width 1 5/8 inch With Handle Non-Adjustable Japanned top,sides cap and handle ground face. DE 100 DE 100 Length 3 1/2 inches cutter width 1 inch. Without Handle Non-Adjustable Japanned top, sides and cap, ground face. DE 101 DE 101 Length 3 1/2 inches cutter width 1 inch.

	Bridge Planes   Iron Bench Planes Smooth Planes Features: Best quality cast iron parts, ground face and sides, Japanned inside, varnished hardwood handle and knob, brass adjusting screws, lateral and longitudinal adjustments, the cutter is of high grade tool steel, works equally well in hard and soft wood. BX2 Smooth Bottom BX2 Length 7 inches cutter width 1 5/8 inch   BX3 Length 8 inches cutter width 1 3/4 inch   BX4 Length 9 inches cutter width 2 inch Corrugated Bottom BX3C Length 8 inches cutter width 1 3/4 inch   BX4C Length 9 inches cutter width 2 inch   BX 4 1/2C Length 10 inches cutter width 2  3/8 inch Jack Planes BX5 Smooth Bottom BX5 Jack Length 14 inches cutter width 2 inch   BX 5 1/2 Jack Length 15 inches cutter width 2 1/4 inch   BX6 Fore Length 18 inches cutter width 2 3/8 inch   BX7 Jointer Length 22 inches cutter width 2 3/8 inch   BX8 Jointer Length 24 inches cutter width 2 5/8 inch Corrugated Bottom BX5C Jack Length 14 inches cutter width 2 inch   BX 5 1/2C Jack Length 15 inches cutter width 2 1/4 inch   BX6C Fore Length 18 inches cutter width 2 3/8 inch   BX7C Jointer Length 22 inches cutter width 2 3/8 inch   BX8C Jointer Length 24 inches cutter width 2 5/8 inch Block Planes Adjustable Japanned top and cap, polished bottom and sides, brass adjusting nut, adjustable throat which can be quickly opened or closed for coarse or fine work, sides are depressed to give firm grip hold on tool, lateral and longitudinal adjustment.  BX 9 1/2 BX 9 1/2 Length 6 inches cutter width 1 3/4 inch   BX 15 Length 7 inches cutter width 1 3/4 inch. Knuckle Joint Adjustable Japanned top, polished face and sides, nickel plated, brass adjusting nuts and trimmings, adjustable throat which can be quickly opened or closed for coarse or fine work, sides are depressed to give firm grip hold on tool, lateral and longitudinal adjustment. BX 18 BX 18 Length 6 1/4 inches cutter width 1 5/8 inch. Low Angle Adjustable Japanned top, polished face and sides, Nickel plated, Brass adjusting nuts and trimmings, Adjustable throat which can be quickly opened or closed for coarse or fine work, sides are depressed to give firm grip hold on tool, lateral and longitudinal adjustment. BX 60 1/2 BX 60 1/2 Length 6 inches cutter width 1 1/2 inch   BX 65 1/2 Length 7 inches cutter width 1 1/2 inch Non-Adjustable Double End Japanned frame and trimmings, nickel plated adjusting screw and walnut knob, has two slots and a movable cutter seat, cutter can be removed and seat reversed when it is desired to use the tool as a nosing plane when working up to walls or into corners. BX 130 BX 130 Length 8 inches cutter width 1 3/4 inch. Non-Adjustable Blade secured or released by turning thumb wheel, cast iron body and cap, japanned, ground face and blade, tool steel cutter, tempered, ground and polished. BX 102 BX 102 Length 5 1/2 inches cutter width 1 1/4 inch. Non-Adjustable Blade secured or released by turning thumb wheel, cast iron body and cap, japanned, ground face and blade, tool steel cutter, tempered ground and polished. BX 110 BX 110 Length 7 inches cutter width 1 3/4 inch. Lever Adjustment Blade secured or released by turning thumb wheel, longitudinal adjustment of cutter. BX 103 BX 103 Length 5 1/2 inches cutter width 1 1/4 inch. Screw Adjustment Blade secured or released by turning thumb wheel, longitudinal adjustment of cutter. BX 220 BX 220 Length 6 3/4 inches cutter width 1 5/8 inch. Toy size Plain Throat Without Handle For amateurs use and boys' tool chests, all japanned, ground face and blade, cast iron body and cap, tool steel cutter, tempered ground and polished. BX 101 BX 101 Length 3 1/2 inches cutter width 1 inch. Toy size Plain Throat With Handle For amateurs use and boys' tool chests, all japanned, ground face and blade, cast iron body and cap, tool steel cutter, tempered ground and polished. BX 100 BX 100 Length 3 1/2 inches cutter width 1 inch. Information obtained from 1929 Shapleigh Diamond Edge Hardware catalog