|
Features:
The cutters are adjustable endwise and sidewise and rest on their seats at an angle of 20 degrees. The throats are adjustable for coarse or fine work. Fitted with hand-y feature.
Japan Trimmings
9 1/2 length 6 inches cutter width 1 5/8 inches
15 length 7 inches cutter width 1 5/8 inch
Nickel Trimmings
16 Length 6 inches width cutter 1 5/8 inch
17 Length 7 inches width cutter 1 5/8 inch
Handled
These planes have an iron handle with rosewood knob extending from the rear making it convenient to work the plane with both hands.
9 3/4 Length 6 inches cutter width 1 5/8 inch
15 1/2 Length 7 inches cutter width 1 5/8 inch
Knuckle Joint
Fitted with a patented lever or cap called knuckle joint which being entirely of steel is pratically indestructible.
18 Length 6 inches cutter width 1 5/8 inch
19 Lenght 7 inches cutter width 1 5/8 inch
Steel
Similar in design to the regular no. 18 block plane, but the bottom and adjustable front are made of steel, making the plane practically indestructible.
S18 Length 6 inches cutter width 1 5/8 inch
Aluminum
Similar in construction to the regular no. 18 block plane, but the bottom and adjustable front are made of aluminum, making it extremely light in weight and rust proof.
A18 Length 6 inches cutter width 1 5/8 inches
Low angle block planes
The cutters are adjustable endwise by means of the adjusting wheel at the rear of the plane. In these planes the cutter rests on its seat at an angle of only 12 degrees, which permits of great ease in owrking across the grain on hard woods. All numbers except no. 62 have the Hand-y feature.
Adjustable throat Nickel Trimming
60 Length 6 inches cutter width 1 3/8 inches
| 60 1/2 |
|
Adjustable throat Japan Trimming
60 1/2 Length 6 inches cutter width 1 3/8 inch
65 1/2 Length 7 inches cutter width 1 5/8 inch
Adjustable throat Knuckle Joint
65 Length 7 inches cutter width 1 5/8 inch
| 61 |
|
Non-Adjustable Throat
Nickel trimming with Rosewood knob
61 Length 6 inches cutter width 1 3/8 inch
63 Length 7 inches cutter width 1 5/8 inch
Adjustable Throat
Especially adapted for use in cutting across the grain on heavy work, where more power is required than can be obtained by the use of the ordinary block plane. It is fitted with a rosewood handle and knob, and is designed to be operated with both hands. No. 164 has an overhead adjustment. It is short in length, making it an ideal plane for working into small places.
| 62 |
|
62 Length 14 inches cutter width 2 inches
Nickel Trimming
164 Length 9 inches cutter width 2 inch
Stanley Block Planes
Adjustable
The no. 103 is for light work. The cutter is adjustable endwise. The bottom is ground true and the sides neatly Japanned.
103 Length 5 1/2 inches cutter width 1 3/8 inch
with lever adjustment
The no. 120 is similar to design to the no. 103, having the same form of cutter adjustment and cutter fastening device. However, in this plane the sides are ground.
120 Length 7 inches cutter width 1 5/8 inch
Lever adjustment and Rosewood knob
The no. 220 is in many ways better adapted for average use than any of the cheaper block planes made. It is ground on both bottom and sides. The cutter is fastened by a lever and cam, and is adjustable endwise.
220 Length 7 inches cutter width 1 5/8 inch
Screw adjustment and Rosewood knob
Non-Adjustable
The nos. 100 and 101 are very handy little planes for household use and many mechanics carry one in their kits for odds and ends of light work. No. 100 has an iron handle.
| 100 |
|
100 Length 3 1/2 inches width cutter 1 inch and handled
101 Length 3 1/2 inches cutter width 1 inch
The no. 102 is a light serviceable plane. The bottom is ground and the sides are Japanned.
102 Length 5 1/2 inches cutter width 1 3/8 inch
The no. 110 is the most popular of all the non-adjustable block planes. Both the bottoms and sides are ground and in place of the boss on the front for a finger rest, it has a Rosewood knob.
110 Length 7 inches cutter width 1 5/8 inch
Block and Rabbet Plane
A detachable slide will easily change it from a block plane to a rabbet plane, and vice-versa. The cutter is adjustable endwise and set on a skew.
140 Length 7 inches cutter width 1 3/4 inch
Japan Trimming and Rosewood Knob
Double End Adjustable
A combination block and bull nose plane. It has two slots and a movable cutter seat. Use center cutter seat and slot for ordinary block plane work. For use as a bull nose plane, reverse the cutter seat by throwing over the adjusting wheel. It is fitted with the Hand-y feature, and the cutter is adjustable endwise.
131 Length 8 inches cutter width 1 5/8 inch
Japan trimming with Rosewood knob
Adjustable Block
Designed especially for manual traing use. It is fitted with the Hand-y feature. The cutter is secured in its place by a lever fastened with a cam. Cutter adjustable endwise.
203 Length 5 1/2 inches cutter width 1 3/8 inch
Rosewood Knob
Edge Trimming Block
For trimming or smoothing the edge of boards for a square or close fit. The cutter works on a skew. Wood blocks of various bevels may be attached, enabling the user to make a slanting cut.
95 Length 6 inches cutter width 7/8 inch
Japanned
Double End Non-Adjustable
It has two slots and tow cutter seats. The center seat and slot to be used for ordinary block plane work, the other slot and seat for use when it is desired to work same as a bull nose plane.
130 Length 8 inches cutter width 1 5/8 inch
Hardwood knob
Bull Nose Rabbet
This plane will be found very useful for working close up into corners or other difficult places. The mouth can be adjusted for different widths by means of the set screw on top of the plane.
75 Length 4 inches cutter width 1 inch
Japanned
|
