|
| Antique Bell System Tools |
|
Welcome to Rose Tools, Inc also known as Rose Antique Tools. We are a different kind of website which mixes the antique tools with the new tools. We are an authorized dealer for Dremel, Bosch, Rotozip, Skill and Flexcut tools. We have been selling tools online since 2001 and have shipped all over the world! We have even sold tools to Universal Studios for a movie that was released in 2007 called "Evan Almighty". Operating hours are Monday-Friday from 8-5 cst and weekends by appointment only.
If you are not comfortable placing an order on the computer and would like to order anything by phone you can reach us at 479-787-7673 CST we also accept money orders and checks. You can also reach us by email at Rose Tools, Inc.
We do not do appraisals of any kind. If you need information on a tool try visiting our main website at www.roseantiquetools.com we have several old tool catalogs which we have scanned and saved to adobe pdf form, to help you in identifying your old tools
Rose Tools Inc. is located at: 15086 Fielding Road Gravette, Arkansas 72736 Payment address: Rose Tools, Inc. PO Box 147 Hiwasse, Arkansas 72739 WE SHIP WORLDWIDE!! We ship via United States Postal Service only All Arkansas residents there will be 7% sales tax Payment Terms: We accept several payments which include: Visa, Master Card, Discover, American Express and Paypal. The following are also accepted forms of payment: money orders, cashier checks and personal checks.
Please Note: According to Wikipedia an antique is defined as:
"An item which is at least 50 to 100 years old and is collected or desirable due to rarity, condition, utility, or some other unique feature. Motor vehicles, power tools and other items subject to vigorous use in contrast, may be considered antiques in the U.S. if older than 25 years, and some electronic gadgets of more recent vintage may be considered antiques."
We only have one each of any old tool and please make sure you check out all of our pages they are numbered on the top and bottom of the pages and a lot of times we have more than one picture. Move your cursor over a picture and click on the picture to show more details of an item. Any questions give us a call or email.
|
1 2
|
|
|
Wrench measures approx. 13" long has Bell System with an S stamped on one side tool is in good condition |
|
|
|
Tool has Crescent LIC. Pat 2050-9 made in USA on one side and Bell System on the other pliers measure approx. 9" and in good condition. |
|
|
|
Tool has Crescent LIC. Pat 2050-9 made in USA on one side and Bell System on the other pliers measure approx. 9" and in good condition. |
|
|
|
Tool has Crescent LIC. Pat 2050-9 made in USA on one side and Bell System on the other pliers measure approx. 9" and in good condition. |
|
|
|
Tool has Utica 159 USA on one side and Bell System on the other pliers measure approx. 9" and in good condition. |
|
|
|
antique brad hammer measures approx. 3 inch from face to end of claw, handle is approx. 11 inch long. tool markings are made in usa. |
|
|
|
antique linemans hammer measures approx. 3 3/4 inch from face to face, handle is approx. 9 inch long. tool markings are bell system. |
|
|
|
antique hatchet measures approx. 6 1/2 inch from edge to butt, cutting edge is 4 1/2 inch. tool markings on one cheek are bell system. the other side is made in usa. tool has some rust. handle is loose. wooden handle has cracks and is worn. |
|
|
|
antique hammer measures approx. 13 inch long, from face to pane is 4 1/2 inch. tool markings are bell system. tool has some rust. wooden handle has a crack and is chipped. |
|
|
|
antique hammer measures approx. 9 inch long, from face to face is 3 3/4 inch. tool markings on bottom of head are bell systems. tool has some rust. wooden handle has cracks and is worn. with this tool you also get a star drill bit. markings are phillips delaware 1/4. |
|
|
|
antique hammer measures approx. 9 inch long, from face to face is 3 3/4 inch. tool markings on bottom of head are bell system, inside a circle. wooden handle has cracks and chips and is worn. |
|
|
|
antique hammer measures approx. 14 inch long, from face to tip of claw is 5 1/4 inch. tool markings on cheek are bell systems. wooden handle may not be original, not sure. markings on handle are fire brand. |
|
|
|
antique hammer measures approx. 13 inch long, from face to tip of claw is 5 inch. tool markings on one cheek is bell systems, the other cheek is marked stanley, inside a rectangle. handle is loose. wooden handle is worn. |
|
|
|
antique memorabilia is approx. the size of a quarter. the shape is a bell. the marking on one side is local and long distance telephone. the other side is when in doubt telephone and find out. use the bell. pat. may 15, 1905 pat. june 6,1905 the whitehead and hoag co. newark n.j. the pat. dates and co are in tiny print. |
|
|
|
antique bell system memorabilia is approx. the size of a quarter. the markings on one side are american telephone & telegraph co. and associated companies local and long distance bell system. the other side is when in doubt telephone and find out n.y. telephone co. it is a circle with a bell printed on one side. |
|
|
|
antique linemans pliers measures approx. 8 1/2 inch long. tool markings on one side are bell system, the other side is m. klein & sons klein tools trade mark chicago usa. part of markings are inside a circle, the other are on outside of circle. |
|
|
|
antique plastic flash light measures approx. 7 1/2 inch long, light is 1 1/2 inch wide. tool markings on clip are bell system. markings on bottom are gits (inside a circle) made in u.s.a. markings on side are gits (inside a circle) made in u.s.a., inside a circle. markings on other side are 122, inside a circle. tool has some scratches. |
|
|
|
antique splicer measures approx. 9 1/4 inch long, blade is 3 3/4 inch long, blade is 1 3/4 inch wide. tool markings are bell systems, straight line, under this is 3 diamonds with letters inside. 1 is U, 2 is TI, 3 is CA. tool has some rust and pitting. |
|
|
|
antique splicer measures approx. 9 1/4 inch long, blade is 4 3/4 inch long, blade is 2 7/8 inch wide. tool markings are bell system. wooden handle has some stain spots. tool has some rust. |
|
|
|
antique auger drill bit measures approx. 12 1/2 inch long. tool markings are bell system c irwin, inside a square. marking also has 13. tool has some rust. |
|
|
|
antique wooden folding ruler measures approx. 7 5/8 inch long when folded, 1 5/8 wide when folded. ruler measures 71 inch long, when unfolded, 5/8 inch wide. tool markings are bell system stanley. tool has some rust. tool has some paint and tar spots. |
|
|
|
antique scraper measures approx. 6 inch long, blade is 3 1/2 inch long.tool markings are bell system bridgeport. tool has some rust. wooden handle has some scratches. |
|
|
|
antique stapler measures approx. 7 3/4 inch long, 5 inch high.tool markings on one side are bell system made in u.s.a. TM 79516. markings on other side are heller tacker brooklyn-n.y. markings on end of stapler are HELLER HELLER Staples. tool has some rust and scratches. |
|
|
|
antique stapler measures approx. 7 3/4 inch long, 6 1/2 inch high at handle. tool markings on one side are "bell system" the heller corp. cleveland ohio. markings on other side are "IT'S A HELLER" the heller corp. cleveland ohio. markings on the end of stapler are HELLER heller staples use only heller staples. tool has some scratches. |
|
|
|
antique stapler measures approx. 7 3/4 inch long, 6 1/2 inch high at handle. tool markings on one side are "bell system" the heller corp. cleveland ohio. markings on other side are "IT'S A HELLER" the heller corp. cleveland ohio. markings on the end of stapler are HELLER heller staples use only heller staples. tool has some scratches. |
|
|
1 2
|
Welcome to Rose Tools, Inc also known as Rose Antique Tools. We are a different kind of website which mixes the antique tools with the new tools. We are an authorized dealer for Dremel, Bosch, Rotozip, Skill and Flexcut tools.
We have been selling tools online since 2001 and have shipped all over the world!
We have even sold tools to Universal Studios for a movie that was released in 2007 called "Evan Almighty".
Operating hours are Monday-Friday from 8-5 cst and weekends by appointment only.
If you have questions you can reach us by phone
479-787-7673 CST
You can also reach us by email at Rose Tools, Inc.
We do not do appraisals of any kind. If you need information on a tool try visiting our main website at www.roseantiquetools.com we have several old tool catalogs which we have scanned and saved to adobe pdf form, to help you in identifying your old tools
Rose Tools Inc. is located at: 15086 Fielding Road Gravette, Arkansas 72736
Payment address: Rose Tools, Inc. PO Box 147 Hiwasse, Arkansas 72739
WE SHIP WORLDWIDE!!
We ship via United States Postal Service only
All Arkansas residents there will be 7% sales tax
Payment Terms: We accept several payments which include: Visa, Master Card, Diners Club, Discover, American Express and Paypal. The following are also accepted forms of payment: money orders, cashier checks and personal checks.
Before paying with paypal please let us know first, so we can confirm that the item is in stock for you
Terms of Use: Please note that there may be certain orders that we are unable to accept and must cancel. Rose Tools, Inc. has the right, at our sole discretion, to refuse or cancel any order for any reason. For your convenience, you will not be charged until your payment method is authorized, the order information is verified for accuracy and your order is shipped. Some situations that may result in your order being canceled include limitations on quantities available for purchase, inaccuracies or errors in product or pricing information, or problems identified by the credit card company. Rose Tools, Inc. may also require additional verifications or information before accepting any order. Rose Tools, Inc. will contact you if all or any portion of your order is canceled or if additional information is required to accept your order. If your order is canceled after your credit card has been charged, we will issue a credit to your credit card in the amount of the charge. In the event that an item is listed at an incorrect price or with incorrect information due to an error in pricing or product information, Rose Tools, Inc. shall have the right, at our sole discretion, to refuse or cancel any orders placed for that item. In the event that an item is mis-priced, Rose Tools, Inc. may, at our discretion, either contact you for instructions or cancel your order and notify you of such cancellation.
|
|
