To visit our non-store website where you can learn about antique tools please follow this link www.roseantiquetools.com
Antique Axes

Welcome to Rose Tools, Inc also known as Rose Antique Tools. We are a different kind of website which mixes the antique tools with the new tools. We are an authorized dealer for Dremel, Bosch, Rotozip, Skill and Flexcut tools. We have been selling tools online since 2001 and have shipped all over the world! We have even sold tools to Universal Studios for a movie that was released in 2007 called "Evan Almighty". Operating hours are Monday-Friday from 8-5 cst and weekends by appointment only.

 

If you are not comfortable placing an order on the computer and would like to order anything by phone you can reach us at 479-787-7673 CST we also accept money orders and checks. You can also reach us by email at Rose Tools, Inc.

We do not do appraisals of any kind. If you need information on a tool try visiting our main website at www.roseantiquetools.com we have several old tool catalogs which we have scanned and saved to adobe pdf form, to help you in identifying your old tools

 

 

Rose Tools Inc. is located at: 15086 Fielding Road Gravette, Arkansas 72736 Payment address: Rose Tools, Inc. PO Box 147 Hiwasse, Arkansas 72739 WE SHIP WORLDWIDE!! We ship via United States Postal Service only All Arkansas residents there will be 7% sales tax Payment Terms: We accept several payments which include: Visa, Master Card, Discover, American Express and Paypal. The following are also accepted forms of payment: money orders, cashier checks and personal checks.
 
Please Note: According to Wikipedia an antique is defined as:
"An item which is at least 50 to 100 years old and is collected or desirable due to rarity, condition, utility, or some other unique feature. Motor vehicles, power tools and other items subject to vigorous use in contrast, may be considered antiques in the U.S. if older than 25 years, and some electronic gadgets of more recent vintage may be considered antiques."
 
We only have one each of any old tool and please make sure you check out all of our pages they are numbered on the top and bottom of the pages and a lot of times we have more than one picture. Move your cursor over a picture and click on the picture to show more details of an item. Any questions give us a call or email.
 
Prev 1 2 3 4 Next 

antique 8239 unmarked broad axe
8239
$45.00
antique axe measures approx. 9 inch long, cutting edge is 12 inch. tool has no markings. tool has some rust. no handle. cutting edge has some small chips.
antique 8237 hand forged axe
8237
$45.00
antique axe measures approx. 7 1/4 inch long, cutting edge is 4 1/2 inch. tool has no markings. no handles. tool has some rust.
antique 8236 unmarked double bit axe
8236
$10.00
antique axe measures approx. 8 1/2 inch long, cutting edges are 4 1/2 inch. tool has no marking. tool has some rust. no handle. cutting edge has chips.
antique 8234 unmarked hatchet
8234
$35.00
antique hatchet measures approx. 5 3/8 inch long, cutting edge is 4 1/8 inch. tool has no markings. tool has some rust. no handle.
antique 8232 plump western union tel. co. broad hatchet
8232
$45.00
antique broad hatchet measures approx. 6 3/4 inch from edge to poll, cutting edge is 5 1/2 inch. tool markings are plumb w. u. tel. co. tool has some rust. no handle.
antique 8231 unknown axe
8231
$75.00
antique axe measures approx. 8 inch long, cutting edge is 5 inch. tool has a small animal shape marking, possible fox or panther or horse. tool has some rust. tool has a hole drilled through it. no handle.
antique 8195 homestead axe
8195
$40.00
antique axe measures approx. 6 inch long, cutting edge is 4 1/2 inch. tool markings are homestead made in usa. tool has some rust. no handle.
antique 8193 unknown double bit axe
8193
$40.00
antique axe measures approx. 10 inch long, cutting edge is 4 3/4 inch. tool markings are M 3 1/2. tool has some rust. cutting edge has chips. no handle.
antique 8190 b & d special axe
8190
$75.00
antique axe measures approx. 7 inch long, cutting edge is 4 1/4 inch. tool markings are b & d special warrented. markings are inside a rectangle shape. tool has some rust. no handle. cutting edge has small chips. has a small crack in eye.
antique 8188 woodward hdwe. co. double bit axe
8188
$75.00
antique axe measures approx. 8 3/4 inch long, cutting edge is 4 inch. tool markings are hand forged -temper tested woodward hdwe.co. cairo, ill. tool has some rust. no handle. tool has been chipped on one corner of cutting edge. tool has chips around eye.
antique 8187 plumb axe
8187
$85.00
antique axe measures approx. 7 inch long, cutting edge is 4 1/4 inch. tool markings are au-to-graf anchor brand plumb. marking also has signature of fayette r. plumb. markings on the other side is 5. cutting edge has been chipped. no handle.
antique 8186 omaha axe
8186
$175.00
antique axe measures approx. 7 1/2 inch long, cutting edge is 5 inch. tool markings are omaha LCA personally guaranteed by. tool has a signature, but not sure what name. no handle.
antique 8185 stiletto axe
8185
$100.00
antique axe measures approx. 6 3/4 inch long, cutting edge is 4 1/4 inch. tool markings are stiletto. tool has a small crack in one end of handle hole. tool has no handle.
antique 8184 kelly hand made double bit axe
8184
$110.00
antique axe measures approx. 8 1/2 inch long, cutting edge is 4 1/2 inch. tool markings are kelly hand made. tool has some rust. no handle.
antique 8183 zenith double bit axe
8183
$175.00
antique axe measures approx. 9 1/2 inch long, cutting edge is 4 1/2 inch. tool markings are zenith marshall wells. markings are inside an oval shape with astar at the top. tool has a chip on one edge. no handle.
antique 9585 unmarked broad axe
9585
$95.00
Antique broad axe measures approx. 9 inch cutting edge, 9 1/4 inch from cutting edge to pole, handle is 33 1/2 inch long. Tool has no markings. Tool has some pitting. Handle has been replaced.
antique 8445 unknown single bit axe
8445
$50.00
antique single bit axe measures approx. 6 1/4 inch from edge to pole, cutting edge is 6 inch long, handle is 30 1/4 inch long. tool has a marking, but is unclear. tool has some rust.tool has forge cracks by pole. tool is chipped around edges of pole. tool has a crack on cheek. tool has a straight handle.
antique 8428 unmarked double bit axe
8428
$40.00
antique double bit axe measures approx. 10 inch from edge to edge, cutting edge is 4 3/4 inch long, handle is 29 1/2 inch long. tool has no marking. tool has some rust. wooden handle is worn and has been chipped on end.
anrique 8458 unmarked corn knife
8458
$20.00
antique corn knife measures approx. 9 inch blade, handle is 20 inch long. tool has no markings. tool has some rust. wooden handle is worn. blade is loose.
Antique 713a Keen Kutter Lathing Hatchet
713a/rebb
$40.00
Keen Kutter lathing hatchet has E.C. Simmons Keen Kutter logo on head which measures approx. 6" long. The cutting edge is approx. 2" wide hammer end is checkered. Handle is worn has been cut at an angle on end and is approx. 12" long
Antique 712a Keen Kutter Produce Hatchet
712a/rebb
$75.00
Keen Kutter produce hatchet has E.C. Simmons Keen Kutter logo on head which measures approx. 5" long. The cutting edge is approx. 2" wide. Handle is worn and is approx. 10 1/2" long
Antique 711a Keen Kutter Scout axe Hatchet
711a/rebb
$55.00
Keen Kutter scout hatchet with steel shank has Shapleighs Keen Kutter logo on head which measures approx. 4 1/2" long hairline cracks on nail slot. The cutting edge is approx. 2 5/8" wide. Handle is rubber over all length approx. 13"
Antique 710a Keen Kutter Hatchet
710a/uuoo
$55.00
Keen Kutter hatchet has E.C. Simmons Keen Kutter logo on head which measures approx. 5 1/2" long. The cutting edge is approx. 3 7/8" wide. Handle is worn not original
Antique 709a Keen Kutter Tommy axe Hatchet
709a/rnoo
$75.00
Keen Kutter hatchet has E.C. Simmons Keen Kutter logo on head which measures approx. 6" long. The cutting edge is approx. 3 1/4" wide. Handle is original partial keen kutter stamped in middle there are some chips but solid
Antique 3a Senior Official Scout Vaughan Axe Head
3a
$220.00
Head has Senior Offical Scout Axe Vaughan logo on one side and other pat pend on the other side. There is a hole drill right above pat pend there are dings and scracthes cutting edge measures approx. 4" overall length is approx. 6 1/2" more info upon request
Prev 1 2 3 4 Next 

Welcome to Rose Tools, Inc also known as Rose Antique Tools. We are a different kind of website which mixes the antique tools with the new tools. We are an authorized dealer for Dremel, Bosch, Rotozip, Skill and Flexcut tools. We have been selling tools online since 2001 and have shipped all over the world! We have even sold tools to Universal Studios for a movie that was released in 2007 called "Evan Almighty". Operating hours are Monday-Friday from 8-5 cst and weekends by appointment only.

If you have questions you can reach us by phone 479-787-7673 CST You can also reach us by email at Rose Tools, Inc.

We do not do appraisals of any kind. If you need information on a tool try visiting our main website at www.roseantiquetools.com we have several old tool catalogs which we have scanned and saved to adobe pdf form, to help you in identifying your old tools

Rose Tools Inc. is located at: 15086 Fielding Road Gravette, Arkansas 72736 Payment address: Rose Tools, Inc. PO Box 147 Hiwasse, Arkansas 72739 WE SHIP WORLDWIDE!! We ship via United States Postal Service only All Arkansas residents there will be 7% sales tax Payment Terms: We accept several payments which include: Visa, Master Card, Diners Club, Discover, American Express and Paypal. The following are also accepted forms of payment: money orders, cashier checks and personal checks. Before paying with paypal please let us know first, so we can confirm that the item is in stock for you Terms of Use: Please note that there may be certain orders that we are unable to accept and must cancel. Rose Tools, Inc. has the right, at our sole discretion, to refuse or cancel any order for any reason. For your convenience, you will not be charged until your payment method is authorized, the order information is verified for accuracy and your order is shipped. Some situations that may result in your order being canceled include limitations on quantities available for purchase, inaccuracies or errors in product or pricing information, or problems identified by the credit card company. Rose Tools, Inc. may also require additional verifications or information before accepting any order. Rose Tools, Inc. will contact you if all or any portion of your order is canceled or if additional information is required to accept your order. If your order is canceled after your credit card has been charged, we will issue a credit to your credit card in the amount of the charge. In the event that an item is listed at an incorrect price or with incorrect information due to an error in pricing or product information, Rose Tools, Inc. shall have the right, at our sole discretion, to refuse or cancel any orders placed for that item. In the event that an item is mis-priced, Rose Tools, Inc. may, at our discretion, either contact you for instructions or cancel your order and notify you of such cancellation.

Send to a Friend!