|
| Antique Hammers |
|
Welcome to Rose Tools, Inc also known as Rose Antique Tools. We are a different kind of website which mixes the antique tools with the new tools. We are an authorized dealer for Dremel, Bosch, Rotozip, Skill and Flexcut tools. We have been selling tools online since 2001 and have shipped all over the world! We have even sold tools to Universal Studios for a movie that was released in 2007 called "Evan Almighty". Operating hours are Monday-Friday from 8-5 cst and weekends by appointment only.
If you are not comfortable placing an order on the computer and would like to order anything by phone you can reach us at 479-787-7673 CST we also accept money orders and checks. You can also reach us by email at Rose Tools, Inc.
We do not do appraisals of any kind. If you need information on a tool try visiting our main website at www.roseantiquetools.com we have several old tool catalogs which we have scanned and saved to adobe pdf form, to help you in identifying your old tools
Rose Tools Inc. is located at: 15086 Fielding Road Gravette, Arkansas 72736 Payment address: Rose Tools, Inc. PO Box 147 Hiwasse, Arkansas 72739 WE SHIP WORLDWIDE!! We ship via United States Postal Service only All Arkansas residents there will be 7% sales tax Payment Terms: We accept several payments which include: Visa, Master Card, Discover, American Express and Paypal. The following are also accepted forms of payment: money orders, cashier checks and personal checks.
Please Note: According to Wikipedia an antique is defined as:
"An item which is at least 50 to 100 years old and is collected or desirable due to rarity, condition, utility, or some other unique feature. Motor vehicles, power tools and other items subject to vigorous use in contrast, may be considered antiques in the U.S. if older than 25 years, and some electronic gadgets of more recent vintage may be considered antiques."
We only have one each of any old tool and please make sure you check out all of our pages they are numbered on the top and bottom of the pages and a lot of times we have more than one picture. Move your cursor over a picture and click on the picture to show more details of an item. Any questions give us a call or email.
|
Prev 1 2 3 4 5 6 7 8 9 10 Next
|
|
antique wooden mallet measures approx. 5 3/4 inch form face to face, width of face is 2 1/4 inch, handle is 14 1/2 inch long. tool weighs approx. 1 1/4 lbs. tool has no markings. tool has some chips and scratches on handle. |
|
|
antique wooden mallet measures approx. 6 1/2 inch from face to face, width of face is 3 inch, handle is 14 1/2 inch long. tool weighs approx. 2 lbs. tool has no markings. |
|
|
antique caulking mallet measures approx. 13 3/4 inch from face to face, width of face is 1 3/4 inch, handle is 14 1/2 inch long. tool has no markings. tool is missing a band. tool is chipped and has cracks. handle is loose. tool is worn. |
|
|
antique masons hammer measures approx. 10 inch from edge to edge, width of edge is 1 1/4 inch, handle is 8 1/4 inch long. tool markings are goldblatt kansas city mo. goldblatt is inside an oval with flat ends. edges are worn. wooden handle has small chips and scratches. |
|
|
antique masons hammer measures approx. 13 inch from edge to edge, edge is 1 1/2 inch wide. handle is 10 3/4 inch long. tool markings are A, inside a horseshoe. made in usa. wooden handle has cracks and chips. |
|
|
antique masons hammer measures approx. 10 1/4 inch from edge to edge, edge width is 1 1/8 inch. tool markings are duffy mfg. co. chicago, 2 straight lines. tool has no handle. tool has some rust and pitting. |
|
|
antique cobblers hammer measures approx. 3 1/4 inch from peen to face. tool has no handle. tool has no marking. tool has some rust. tool has a chip on face edge. face is worn. |
|
|
antique ball peen hammer measures approx. 3 inch from face to tip of peen. tool has no markings. tool has no handle. tool has some rust. |
|
|
antique hammer measures approx. 4 1/2 inch from face to tip of claw, handle is 13 inch long. tool weighs 1 3/4 lbs. with handle. tool markings are witte hdw. co. st. louis u.s. marking is a square with a big X inside, each line of the X has witte on it. finish is worn. tool has some big chipped places on bottom of handle. tool has glue at top of eye. tool has some small chips around edge of face. |
|
|
antique hammer measures approx. 4 1/4 inch from face to tip of claw, handle is 14 inch long. tool weighs 1 3/4 lbs. tool markings are evansville tool works trade tested evansville ind. u.s.a. marking is inside a circle. tool is pitted on one cheek. wooden handle is chipped around edges at end. additional information is evansville tool works was in business from 1898-1936. |
|
|
antique 7 oz. hammer measures approx. 3 3/4 inch from face to tip of claw. tool markings are hibbard. marking is not very clear, it has scratches on and around it. wooden handle is splintering at the top and about 2 inches from the top. handle has a drill hole about 1/2 inch from bottom. handle is chipped on end. |
|
|
antique riveting hammer measures approx. 2 7/8 inch from face to peen, handle is 10 1/4 inch long. tool weighs about 10 oz. with handle. tool has no markings. tool is pitted on face, from use not rust. peen is worn. tool has a drill hole about 1/2 inch from end. |
|
|
antique upholstery hammer measures approx. 3 7/8 inch from face to peen, handle is 9 inch long. tool weighs approx. 12 oz. with handle. tool has no markings. tool has a drill hole about 1/4 inch from bottom of handle. tool has some rust. tool is chipped around edges of face. tool has a nail pulling slot. tool has been demagnetized. |
|
|
antique hammer measures approx. 4 1/4 from face to tip of claw. tool has no markings. tool handle has been cut off at bottom of eye. handle still in eye. tool weighs 1 1/4 lbs. |
|
|
antique small hammer measures approx. 3 1/2 inch from face to tip of peen. tool weighs approx. 7 oz. tool markings are vaughan, inside rectangle. tool is pitted on face, from use. tool has no handle. |
|
|
antique nail set measures approx. 4 inch long. tool markings are keen kutter, inside logo, 2/32. |
|
|
Antique crate opener measures approx. 8 inch long. Tool markings on one side are BOX TERRIER The Bridgeport hdwe. mfg. corp. made in u.s.a., marking on other side is Warranted Tool Steel. |
|
|
Antique crate opener measures approx. 9 inch long. Tool markings are Diamond Tool and Horseshoe Co.T29 Duluth, Minn. U.S.A. Marking also has a horseshoe with a diamond. |
|
|
Antique crate opener measures approx. 9 1/4 inch long. Tool markings are Weber Supply & Specialty Co. Chicago Ill. Tool has previous owners initials. Tool has a nail pulling notch. |
|
|
Antique crate opener measures approx. 9 1/4 inch long. Tool markings are Bixby's Box Opener. Markings on other side are Box Terrier. |
|
|
Antique crate opener measures approx. 9 1/4 inch long. Tool markings are Bixby's Box Opener. Marking on other side is Box Terrier. |
|
|
Antique hand forged strapping hammer measures approx. 13 1/4 inch long, from face to tip of claw is 4 3/4 inch. Tool has no markings. Tool has a hole drilled through handle. Handle is chipped and cracked. |
|
|
antique possible upholstery hammer measures approx. 4 1/2 inch from face to face. tool has no markings. tool has some rust. tool has no handle. |
|
|
antique nail puller measures approx. 17 3/4 inch long, extended is 23 inch long. tool markings on one side are bridgeport hardware mfg. corp., the other side is no. 56 - suregrip made in u.s.a. forged steel. tool has some rust. |
|
|
antique nail puller measures approx. 16 1/2 inch long, extended is 21 inch long. tool markings on one side are smith & hemenway co. inc. irvington new jersey u.s.a., the other side is no. 1 1/2 giant trade mark. tool has some rust and pitting. finish is worn off. tool is chipped on end of handle. |
|
|
Prev 1 2 3 4 5 6 7 8 9 10 Next
|
Welcome to Rose Tools, Inc also known as Rose Antique Tools. We are a different kind of website which mixes the antique tools with the new tools. We are an authorized dealer for Dremel, Bosch, Rotozip, Skill and Flexcut tools.
We have been selling tools online since 2001 and have shipped all over the world!
We have even sold tools to Universal Studios for a movie that was released in 2007 called "Evan Almighty".
Operating hours are Monday-Friday from 8-5 cst and weekends by appointment only.
If you have questions you can reach us by phone
479-787-7673 CST
You can also reach us by email at Rose Tools, Inc.
We do not do appraisals of any kind. If you need information on a tool try visiting our main website at www.roseantiquetools.com we have several old tool catalogs which we have scanned and saved to adobe pdf form, to help you in identifying your old tools
Rose Tools Inc. is located at: 15086 Fielding Road Gravette, Arkansas 72736
Payment address: Rose Tools, Inc. PO Box 147 Hiwasse, Arkansas 72739
WE SHIP WORLDWIDE!!
We ship via United States Postal Service only
All Arkansas residents there will be 7% sales tax
Payment Terms: We accept several payments which include: Visa, Master Card, Diners Club, Discover, American Express and Paypal. The following are also accepted forms of payment: money orders, cashier checks and personal checks.
Before paying with paypal please let us know first, so we can confirm that the item is in stock for you
Terms of Use: Please note that there may be certain orders that we are unable to accept and must cancel. Rose Tools, Inc. has the right, at our sole discretion, to refuse or cancel any order for any reason. For your convenience, you will not be charged until your payment method is authorized, the order information is verified for accuracy and your order is shipped. Some situations that may result in your order being canceled include limitations on quantities available for purchase, inaccuracies or errors in product or pricing information, or problems identified by the credit card company. Rose Tools, Inc. may also require additional verifications or information before accepting any order. Rose Tools, Inc. will contact you if all or any portion of your order is canceled or if additional information is required to accept your order. If your order is canceled after your credit card has been charged, we will issue a credit to your credit card in the amount of the charge. In the event that an item is listed at an incorrect price or with incorrect information due to an error in pricing or product information, Rose Tools, Inc. shall have the right, at our sole discretion, to refuse or cancel any orders placed for that item. In the event that an item is mis-priced, Rose Tools, Inc. may, at our discretion, either contact you for instructions or cancel your order and notify you of such cancellation.
|
|
