To visit our non-store website where you can learn about antique tools please follow this link www.roseantiquetools.com
Antique Chisels

Official PayPal Seal

Welcome to Rose Tools, Inc also known as Rose Antique Tools. We are a different kind of website which mixes the antique tools with the new tools. We are an authorized dealer for Dremel, Bosch, Rotozip, Skill and Flexcut tools. We have been selling tools online since 2001 and have shipped all over the world! We have even sold tools to Universal Studios for a movie that was released in 2007 called "Evan Almighty". Operating hours are Monday-Friday from 8-5 cst and weekends by appointment only.

 

If you are not comfortable placing an order on the computer and would like to order anything by phone you can reach us at 479-787-7673 CST we also accept money orders and checks. You can also reach us by email at Rose Tools, Inc.

We do not do appraisals of any kind. If you need information on a tool try visiting our main website at www.roseantiquetools.com we have several old tool catalogs which we have scanned and saved to adobe pdf form, to help you in identifying your old tools

 

 

Rose Tools Inc. is located at: 15086 Fielding Road Gravette, Arkansas 72736 Payment address: Rose Tools, Inc. PO Box 147 Hiwasse, Arkansas 72739 WE SHIP WORLDWIDE!! We ship via United States Postal Service only All Arkansas residents there will be 7% sales tax Payment Terms: We accept several payments which include: Visa, Master Card, Discover, American Express and Paypal. The following are also accepted forms of payment: money orders, cashier checks and personal checks.
 
Please Note: According to Wikipedia an antique is defined as:
"An item which is at least 50 to 100 years old and is collected or desirable due to rarity, condition, utility, or some other unique feature. Motor vehicles, power tools and other items subject to vigorous use in contrast, may be considered antiques in the U.S. if older than 25 years, and some electronic gadgets of more recent vintage may be considered antiques."
 
We only have one each of any old tool and please make sure you check out all of our pages they are numbered on the top and bottom of the pages and a lot of times we have more than one picture. Move your cursor over a picture and click on the picture to show more details of an item. Any questions give us a call or email.
 
1 2 3 4 Next 

Antique 224a 1 7/8" woodworking gouge
224a
$40.00
Add To Cart
Tool is 1 7/8" wide and measures approx. 7 3/8" from cutting edge to end of tang handle has a crack has a brass ferrule no name found
Antique 222a 1 1/8" Gilpin woodworking gouge
222a
$35.00
Add To Cart
Tool is 1 1/8" wide and measures approx. 9 3/4" from cutting edge to end of shank tool has what looks to read Gilpin has some forge cracks but tool is solid
Antique 221a Hand forged 1 1/4" gouge
221a
$40.00
Add To Cart
Tool measures approx. 13" long and cutting edge is approx. 1 1/4" this is outside measurement hand forged more pictures upon request.
Antique 220a 1 1/4" gouge
$30.00
Add To Cart
I beleive this tool is New Haven Edge tool co. mark is hard to read measures approx. 6 3/8" from cutting edge to end of socket cutting edge is approx. 1 1/4" outside measurement. More pictures upon request
Antique 219a Douglass 1" gouge
219a
$35.00
Add To Cart
Gouge measures approx. 8 1/2" from end of socket to cutting edge which is 1". Has Douglass MFG CO. stamped on tool. More pictures upon request.
Antique 298a D.R. Barton 7 piece Dog leg gouge chisel set
298a
$400.00
Add To Cart
This is a nice set of gouges. Average length of all from end of handle to tip of cutting edge is approx. 15" long. They all have previous owners name stamped on top side towards the shank. All are tang and all have the Barton logo. Handles are all matching with brass ferrules. They are all a shallow gouge Sizes are as follows: 1 1/2" 1 1/4" 1" 7/8" 3/4" 1/2" 1/4" More Pictures upon request
Antique 338a D.R. Barton 1/2" gouge
338a
$40.00
Add To Cart
Gouge has partial mark of DR Barton on tang. Gouge is 1/2" and measures approx. 4 1/2" from shank to cutting edge needs sharpening handle has a crack where ferrule is missing.
Antique 341a D.R. Barton 1/4" gouge
341a
$25.00
Add To Cart
Gouge has partial mark of DR Barton on tang. Gouge is 1/4" and measures approx. 5" from shank to cutting edge needs sharpening this may have been sharpened as a lathe tool at one time handle is good no cracks overall length with handle is approx. 10 1/4"
Antique 339a D.R. Barton 9/16" V Chisel
339a
$45.00
Add To Cart
Chisel has partial mark of DR Barton on tang. The measurement I am taking is from the top and it measures 9/16" and from shank to cutting edge is approx. 5" would need touched up for sharpening Has a brass ferrule overall length is approx. 9 1/2" click on picture for profile view
Antique 337a V 5/8" chisel
337a
$45.00
Add To Cart
There is a name on the tool but I cant make it out. I am measuring from the top and is 5/8" and in good condition. Overall length from handle to cutting edge is approx. 11 1/2" long. the brass ferrule is broken length from tang to cutting edge is approx. 5 1/2" long. Click on picture to view profile of this tool
Antique 346a J.R. Addis & Sons no. 10 chisel fishtail 5/32"
346a
$35.00
Add To Cart
Edge of bevel chisel is 5/32" has the number 10 with prize stamped on one side and JR addis & Sons on the other. Chisel measures approx. 3 1/2" from edge to where it meets the wood. Handle would need replaced has a crack click on picture to view profile of this tool
Antique 343a S.J. Addis 1/8" no. 1 chisel
343a
$45.00
Add To Cart
Chisel measures approx. 1/8" this measurement is from the outside tool has SJ Addis no. 1 stamped on it. From cutting edge to ferrule measures approx. 4 1/2". Handle is good previous owners name has a brass ferrule overall length from tip to end of handle is approx. 9" click on picture to view profile of this tool
Antique 347a S.J. Addis 1/4" no. 1 cast steel chisel
347a
$45.00
Add To Cart
Chisel measures approx. 1/4" has SJ Addis cast steel no. 1 stamped on it. From cutting edge to ferrule measures approx. 4 1/2". Handle is good previous owners name has a brass ferrule overall length from tip to end of handle is approx. 9" click on picture to view profile of this tool
Antique 342a S.J. Addis 3/16" no. 7 gouge
342a
$45.00
Add To Cart
Shallow gouge measures approx. 3/16" this measurement is from the outside tool has SJ Addis no. 7 stamped on it. From cutting edge to ferrule measures approx. 4 1/8". Handle is good previous owners name has a brass ferrule overall length from tip to end of handle is approx. 9"
Antique 385a E. Dudley 1 7/8" socket chisel
385a
$45.00
Add To Cart
Chisel is very heavy duty has E. Dudley stamped on top and thickness is approx. 1/2" towards back and toarwards cutting edge tapers to about 1/4". Total length of chisel from cutting edge to end of socket is approx. 11". Cutting edge is just shy of 2" at 1 7/8" total length of steel to where it widens out is approx. 7" Click on picture to view profile of chisel more pictures upon request
Antique 386a Forged 1 7/8" socket chisel
386a
$35.00
Add To Cart
Chisel is very heavy duty has no makers stamp that I can find. The thickness is approx. 3/8" towards back and toarwards cutting edge tapers to about 3/16". Total length of chisel from cutting edge to end of socket is approx. 10 3/4". Cutting edge is just shy of 2" at 1 7/8" total length of steel to where it widens out is approx. 6 1/8" Click on picture to view profile of chisel more pictures upon request
Antique 416a D.R. Barton & Co. 1 1/4" socket chisel
416a
$45.00
Add To Cart
Chisel has D.R. Barton & Co. Rochester N.Y. Logo and is 1 1/4" wide and 10 5/8" long edge would need sharpening
Antique 419a D.R. Barton 3/4" tang chisel
419a
$45.00
Add To Cart
Chisel has D.R. Barton 1882 Rochester N.Y. Logo and is 3/4" wide and 8 7/8" long to the shank overall length with handle is approx. 13"
Antique 418a D.R. Barton & Co. 3/8" socket chisel
418a
$35.00
Add To Cart
Chisel has D.R. Barton & Co. Rochester N.Y. Logo and is 3/8" wide and 7 1/2" long to end of socket overall length with handle is approx. 10 1/4"
Antique 420a D.R. Barton 1/4" tang chisel
420a
$35.00
Add To Cart
Chisel has D.R. Barton stamped on top and is 1/4" wide and 5 3/4" long to the tang overall length with handle is approx. 11 1/4" handle has The Wellman Prod. Co. Cleveland, O stamped on it
Antique 562a Winchester 1/2" 4983 socket chisel
562a
$40.00
Add To Cart
Winchester chisel has the Winchester trademark 4983-1/2 stamped on the end. Chisel measures approx. 8" from cutting edge to end of socket handle is in fair condition overall length with handle is approx. 11 1/2" long. More pictures upon request.
Antique 563a Winchester 1/4" 4841 socket chisel
563a
$40.00
Add To Cart
Winchester chisel has the Winchester trademark 4841-1/4 stamped on the end. Chisel measures approx. 6" from cutting edge to end of socket handle is in fair condition overall length with handle is approx. 9 1/2" long. More pictures upon request.
Antique 543a D.R. Barton 1" Tang chisel
543a
$35.00
Add To Cart
Chisel has D.R. Barton logo Rochester NY and is 1" wide measures approx. 6 1/4" from cutting edge to top of tang handle has a chunk out of it but is solid must have been a knot there at one time. More pictures upon request.
Antique 535a D.R. Barton 1/4" Tang chisel
535a
$40.00
Add To Cart
Chisel has D.R. Barton stamp and is 1/4" wide measures approx. 7 7/8" from cutting edge to top of tang handle is solid with brass ferrule. More pictures upon request.
Antique 530a D.R. Barton 1/2" Tang chisel
530a
$40.00
Add To Cart
Chisel has D.R. Barton stamp and is 1/2" wide measures approx. 7 1/4" from cutting edge to top of tang overall length is approx 13 1/2" handle is good missing ferrule. More pictures upon request.
1 2 3 4 Next 

Welcome to Rose Tools, Inc also known as Rose Antique Tools. We are a different kind of website which mixes the antique tools with the new tools. We are an authorized dealer for Dremel, Bosch, Rotozip, Skill and Flexcut tools. We have been selling tools online since 2001 and have shipped all over the world! We have even sold tools to Universal Studios for a movie that was released in 2007 called "Evan Almighty". Operating hours are Monday-Friday from 8-5 cst and weekends by appointment only.

If you have questions you can reach us by phone 479-787-7673 CST You can also reach us by email at Rose Tools, Inc.

We do not do appraisals of any kind. If you need information on a tool try visiting our main website at www.roseantiquetools.com we have several old tool catalogs which we have scanned and saved to adobe pdf form, to help you in identifying your old tools

Rose Tools Inc. is located at: 15086 Fielding Road Gravette, Arkansas 72736 Payment address: Rose Tools, Inc. PO Box 147 Hiwasse, Arkansas 72739 WE SHIP WORLDWIDE!! We ship via United States Postal Service only All Arkansas residents there will be 7% sales tax Payment Terms: We accept several payments which include: Visa, Master Card, Diners Club, Discover, American Express and Paypal. The following are also accepted forms of payment: money orders, cashier checks and personal checks. Before paying with paypal please let us know first, so we can confirm that the item is in stock for you Terms of Use: Please note that there may be certain orders that we are unable to accept and must cancel. Rose Tools, Inc. has the right, at our sole discretion, to refuse or cancel any order for any reason. For your convenience, you will not be charged until your payment method is authorized, the order information is verified for accuracy and your order is shipped. Some situations that may result in your order being canceled include limitations on quantities available for purchase, inaccuracies or errors in product or pricing information, or problems identified by the credit card company. Rose Tools, Inc. may also require additional verifications or information before accepting any order. Rose Tools, Inc. will contact you if all or any portion of your order is canceled or if additional information is required to accept your order. If your order is canceled after your credit card has been charged, we will issue a credit to your credit card in the amount of the charge. In the event that an item is listed at an incorrect price or with incorrect information due to an error in pricing or product information, Rose Tools, Inc. shall have the right, at our sole discretion, to refuse or cancel any orders placed for that item. In the event that an item is mis-priced, Rose Tools, Inc. may, at our discretion, either contact you for instructions or cancel your order and notify you of such cancellation.

View Cart
Send to a Friend!
Solution Graphics
Official PayPal Seal